NetMetal ac2 (RBD23UGS-5HPacD2HnD-NM)

More power and advanced features, with the same design philosophy as its predecessors – the new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. This is the best way to add IPsec hardware acceleration to your backhaul link! We have added an out-of-the-box 2.4/5 GHz dual-band support – no need for additional tinkering!
NetMetal ac² can handle massive loads, as it features an improved 4-core CPU and 256 MB RAM. There is a miniPCIe slot for an LTE or other wireless modules and an SFP port for fiber. The NetMetal ac² can be a very adaptable addition for all kinds of setups.
Two RP-SMA connectors allow adding an antenna of your choice. If necessary, you can adapt the NetMetal ac² for lower range use with such antennas as our HGO-antenna-OUT screw-on omni antenna unit. It provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band.
The enclosure has an IP rating of IP54 with protection against splashing from any angle, but it can still be opened and closed with one hand. Very handy in rough environments!


Datasheet

Technical Specification: #

Technical data
Architecture	ARM 32 bit
CPU	IPQ-4019
CPU nominal frequency	716,8 MHz
CPU core count	4
Size of RAM	64 MB
Memory type	SPI flash
Memory size	16 MB
Dimensions	143 x 247 x 48 mm
License level	4
Operating system	RouterOS
Tested ambient temperature	-40°C .. +70°C
Powering
Number of DC inputs	2 (DC jack, PoE-IN)
PoE in	802.3 af/at
Poe in input voltage	24 - 57 V
DC jack input voltage	12 - 57 V
Max power consumption	28 W
Max power consumption without attachments	12 W
Wireless
	2,4GHz	5GHz
Max data rate	300 Mbit/s	866.7 Mbit/s
Number of chains	2	2
Connectors		2
Connector type	RP-SMA	RP-SMA
Supported protocols	802.11 b/g/n	802.11 a/n/ac
Interface model	IPQ-4019	IPQ-4019
Wi-Fi generation	Wi-Fi 4	Wi-Fi 5